Computer Movers Inc. was founded approximately 30 years ago. As technology and equipment requirements for all industries increase, there is a need for a carrier prepared to handle new technology properly. Computer Movers, Inc specializes in handling electronics professionally and efficiently far exceeding normal carriers. Since Computer Movers, Inc inception, our damage and claims history falls well below industry norms. Whether you are a small business or Fortune 500 company, Computer Movers has the expertise, equipment, and willingness to exceed your expectations at any opportunity.
Our ultimate goal is to complete your move with as minimal disruption to your ongoing business.
- Certain types of equipment such as copiers or computer equipment may require special servicing by the company trained personnel. These arrangements should be made directly with the vendor of each particular machine prior to the move date. Personal Computers should be backed-up and separate components should be disconnected prior to moving, by our move crew. Remove loose wires and pack in box.
- If special services requiring electricians, plumbers or machinists are needed to disconnect equipment, please notify your supervisor so that proper arrangements may be made. Internal servicing may be required and if not followed may void service warranties.
- Copying, printing or reproducing machines may contain fluids that must be drained particularly if they will be moved up/down stairs.
- Escalera and Powermate Stair Climbers, for moving equipment up/down stairs with minimal vibration.
- Lee Dolly, for moving goods across rough terrain, again with minimal vibration.
- Hipp Engineeering Tipping Tool, for moving large wide format plotters that won’t normally fit in an elevator without up-ending.
- Custom designed and built Gondolla Dollies.
- Six 1200 LBS Capacity Kick-back Dollies for moving loaded server racks quickly and efficiently.
*Please refer to our gallery section to view the amount of equipment in our warehouse pictures. CMI maintains we are better equipped to handle electronics than many carriers that are much larger than us. Our trucks are air ride suspension and have many features designed for safe, efficient transit for electronics.*
- It should be the responsibility of each department or section head to have the staff follow these instructions in order to minimize loss of time in preparing for the move.
- Each employee should be responsible for his or her own preliminary packing for the move. To assist in this task, detailed instructions for packing and marking follow. Unless otherwise specified, packing and unpacking will be performed by your personnel.
- It is important that only personnel involved directly with the move be present during the course of the actual move.
- One-piece recyclable polystyrene crates and/or one-piece self-locking cardboard moving cartons will be available for packing. Be sure to receive training on the proper methods for packing and stacking crates or assembling the cardboard moving cartons. Each has advantages in specific situations but for ease of packing and speed of moving, the crates are the most desirable. Please see instructions below for further information regarding assembly and packing.
- All packing should be completed prior to the actual start of the move.
- DESKS – It is necessary to empty desks. Paper clips, pencils and other loose items should be sealed in envelopes. Current working papers, letter trays, books and items on top of the desk should be packed in a carton. Protect all glass receptacles with paper or other material in the carton.
- FILING CABINETS/UPRIGHT – These cabinets will generally be moved with contents intact. Tighten the internal draw to hold contents in place. Lock the cabinet if possible. If not possible, secure each drawer with filament tape. If locked, remove the key and pack in a safe place. Note: If the file has a punch-in lock and you do not have the key, wrap tape around the lock to avoid accidental locking.
- FILING CABINETS/LATERAL – These cabinets cannot be moved with the contents intact. Pack all of the contents in cartons, and secure the drawers by locking or with tape as above.
- BOOKCASES – All contents should be packed in cartons. After packing, remove the shelves and tape together. Remove the shelf pins and pack in an envelope.
- SUPPLY OR STORAGE CABINETS – All contents should be packed in cartons. Lock/tape the cabinet doors.
- COAT RACKS OR LOCKERS – Pack all contents, including hangers.
- SMALLER OFFICE MACHINES, (scanners, printers, etc.) DO NOT PACK THESE MACHINES. Leave the machine on top of the desk or stand. Be sure the equipment has been serviced and all components disconnected. Small items, such as power cords should be packed in zip lock bags or cartons.
- PICTURES, MAPS AND BULLETIN BOARDS – These items, if secured to the wall, should be removed. Tag each piece and leave against the wall. The mover will handle. Small pictures, etc., should be consolidated so as to fill a carton. Newspaper should be stuffed in empty spaces between the pictures.
All cabinets should be locked prior to and during the move. If security regulations require escorts, arrangements should be made with the Computer Movers, Inc. Project Manager.
Computer Movers, Inc. will not be responsible for the transportation of these items. Employees should arrange to move their own.
TAGGING AND MARKING INSTRUCTIONS
Each and every item to be moved must be tagged or marked. Keep in mind that certain items consist of several different sections, such as detachable bookcase units. Each of these sections must be tagged. Specific and detailed code assignments for floor, room number, etc. can be obtained from your move coordinator. Be sure you fill in correct information on each tag. Certain furniture and equipment may need dismantling for moving (L-units or conference tables). Be sure to tag each piece with the same tag information.
LOCATION OF FURNITURE IN NEW OFFICE
On a placard provided by our project manager or on a blank sheet of paper, draw an arrangement of furniture in your new office. Each item should be identified and should be drawn close to scale. Be sure to draw in the location of the door or window. Always place the door at the bottom of the drawing. Give to your move coordinator prior to the move.
LOCATION OF TAGS
A uniform marking system is necessary and will greatly assist the movers in locating the furniture and equipment in the new office. Your Project Manager will help design a workable, efficient system.
Each label’s color identifies a piece as going to a particular floor. On that floor, it will go to the room number specified. On the door to each room should be a floor plan depicting placement in the room for all identified pieces. Dividing the building into color-coded floors helps the move proceed more quickly and eliminates backup at elevators; identifying rooms and furniture pieces helps get things placed exactly where you want them.
THEFT OR LOSS
Report missing items immediately. In most instances, these items are discovered within a short period of time and are found to have been misplaced due to the lack of, or improper tagging.
Computer Movers, Inc. cannot accept liability for missing items unless such items are considered missing while they are in our complete and total control, or if it can be proven that there was gross negligence on the part of our personnel. We provide security insofar as the uniformed identification of our crews and the sealing of each truck as it is loaded. It is recommended that a customer’s representative record the number of the randomly numbered seal both as it is affixed and prior to its removal.
Most people are honest, but given the opportunity, even the most honest movers, cleaning people, telephone installers, or even your own personnel, can be tempted to steal. Do not give anyone the opportunity.
CONDUCT A PRE-MOVE “PURGE” CAMPAIGN
To All Personnel: Please read these suggestions carefully and dispose of everything you will no longer be needing, before the move. Do not delay doing a good “housecleaning job” so that obsolete material you do not want can be discarded now thereby reducing packing and moving charges.
Individual Files: Please go through each file, folder by folder, with the thought of eliminating as much as possible.
General Files: Transfer to storage center all records with predetermined retention periods. Transfer records ahead of schedule if it will eliminate the necessity of moving them.
Eliminate prior to commencement of packing all unneeded items. Remember, all personal items are to be taken home.
Analyze contents of storage cabinets and reduce stocks to a minimum. Provisions will be made to purchase stationary and supplies for delivery to the new location.
-Glass tops and blotters tag separately and leave on desks
-Remember to tag all trash cans and floor mats
-Tag lamp shades and lamp bases
-Office appliances, coffee machines (contact service vendor), microwaves remove & pad glass plate, unplug refrigerator and leave door open. Plug in at new location immediately following move.
-Instructions for assembly of packing cartons
ASSEMBLING OFFICE TOTES
Unfold carton and square off. Turn carton upside down to fold up bottom flaps. (the print will be upside down). Fold (flap a) completely over and down to inside of carton so that (flap a) will lay against the body of carton.
Next fold (flaps b) completely over to lay against (flap c).
After (flaps b) are folded over, fold (flap c) over flush with bottom of carton. Turn carton right side up and lay flat on bottom.
After carton is turned right-side- up, fold (flaps b) up and against side of carton. Push hand holes on both sides of carton inward to lock through hand holes on (part b).
Then fold (flap a) down and lay flush against bottom of carton.
You are now ready to pack carton. To fold top flaps, fold small flaps first and fold large flaps over to interlock with each other.
LOST AND FOUND
On larger office moves at the delivery site there needs to be a staging area called ‘lost and found’ where any goods that are mislabeled, have labels that are missing, or even for items where the final office location is not yet determined can be placed. Then after the move is completed this area is where staff would come to recover these items and make final decisions about where the remaining goods are placed.